Triblock P 5kg
Three-component epoxy-cement-based moisture barrier and consolidating primer. Used to block rising damp or residual moisture in cement-based substrates before applying adhesives or coatings.
Product Type
Three-component system: A (liquid resin), B (hardener), C (powder filler)
Grey, fluid paste once mixed
Mixing ratio: Part A:B:C = 1:1:6.5 by weight
Pot life: approx. 40–60 minutes at +23 °C
Density of mix: approx. 1.65 g/cm³
Application
Apply by trowel, brush, or roller on dry, clean substrates
Minimum substrate temperature: +5 °C
Surface must be solid, compact, and free of dust, oil, or paint
Apply one or two coats depending on moisture level
Apply second coat after 24 hours if needed
Ready for overcoating with cementitious products after 24–48 hours
Coverage
Approx. 0.5–0.7 kg/m² per coat depending on substrate roughness and porosity
Performance & Features
Blocks moisture up to 4.5% CM (carbide method)
Reduces porosity and improves adhesion of levelling compounds and adhesives
Excellent mechanical strength and bonding to concrete
High chemical resistance once cured
Compatible with cementitious adhesives, self-levelling compounds, screeds
Safety & Cleanup
Wear PPE: gloves, goggles, and mask
Clean tools immediately with water before product hardens
Once cured, mechanical removal is required
Not for use on substrates with active water infiltration
Packaging & Storage
Supplied in pre-measured kits (5kg total)
Store in original packaging, dry and frost-free
Shelf life: 12 months